Makita 18V 3 Piece Combo DK0102X1
Makita 18V 3 Piece Combo DK0102X1
Makita 18v Auto Feed Screw Gun DFR450ZX
Features:
- Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
- Increased rotational speed - 4,000 rpm ensuring smooth screw driving
- Tool-less stopper base adjustment
- New silent clutch - features high durability with direct drive transmission in reverse rotation
- Reversing switch - carriage can be removed/installed without tool for bit replacement
- Rigid aluminium casing
| Specifications: | |
|---|---|
| Voltage | 18V |
| Capacity(Collated Drywall Screw) | 4 mm x 25-40 mm |
| Max Output | 235W |
| No Load Speed | 4000 rpm |
| Length | 424 mm |
| Weight | 2.3 kg |
Makita Cross Line Laser SK104Z
Features:
- Self levelling - automatically levels the laser
- vertical and horizontal alignment
- Laser class 2
- Protection class IP54 - protection from small amounts of water and dust ingress
- Laser lock lever disables self levelling function and protects the laser during storage or travel
| Specifications: | |
|---|---|
| Battery | 3x AA |
| Dimensions (LxWxH) | 111x117x72mm |
| Levelling Accuracy | 0.75mm |
| Range | 15m |
| Self-Levelling Range | 4 degrees |
| Weight | 470g |
Makita 18v Mobile Impact Driver DTD152Z
Features:
- extreme Protection Technology (xPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- NEW Battery Protection System provides Over-Discharge, Temperature and Circuit Protection for enhanced performance, battery cycle life and overall battery life
- Increased max. torque of 1,460 in. lbs.
- One-touch bit holder enables quick and easy bit installation
- Twin LED lights with pre-glow and after-glow functions
- Glow in the dark rubber bumper
- Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold
| Specifications: | |
|---|---|
| Battery Capacities | 18V Li-Ion |
| Hex Shank | 1/4 Hex |
| No Load Speed | 0 - 2,900 RPM |
| Impacts Per Minute | 0 - 3,500 IPM |
| Maximum Fastening Torque | 1,460 in. lbs (165 Nm) |
| Vibration Level | 10.5 m/s² |
| Noise Level | 93 dB(A) |
| Overall Length | 5-3/8" (137 mm) |
| Net Weight | 2.0 lbs (0.9 kg) |
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L
Features:
- Star Protection
- Battery Fuel Gauge
- Multi-contact slide type terminal
- Protective gel coating
- Active 3 Controls current, voltage and thermal temperature
- Shock absorbing construction
- The fastest charge times in the industry
- Intelligent battery & charger communication system
- Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
- Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
- Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
- Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
- Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
- Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
- Up 66% more run time than BL1830*
- 4-Stage battery fuel indicator
- 45 minute charge time
| Specifications: | |
|---|---|
| Voltage | 18V |
| Dimensions LxWxH | 11 x 8 x 6.5 cm |
| Weight | 0.63 Kg |
Makita DC18RC Active 3 Li-Ion Charger
Features:
- Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
- Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
- Forced air cooling fan - cools the battery to minimise charging time
- Digital power display identifies the condition of the battery and charging condition
| Specifications: | |
|---|---|
| Cell Capacity | 1.5-5.0 Ah |
| Charge Time | 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah) |
| Net Weight | 820 g |
| Overall Length | 185 mm |
| Voltage | 18 V |
Submit Review
You may be interested in this
Warranty Terms for Makita
MAKITA POWER TOOLS & ACCESSORIES:
Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):
| Category | Warranty (Effective 1st July 2020) |
|---|---|
| ALL CORDLESS SKINS LI-ION | 5YR (Registered within 30 days)* or 3YR (Registered post 30 days or Non-registered)** |
| 240V – PNEUMATIC – GAS – LASER | 2YR |
| PETROL POWERED PRODUCTS | 2YR |
| ADAPTORS – BATTERIES – CHARGERS | 2YR |
| CLOTHING – ACCESSORY CONSUMABLES – SPARE PARTS*** | 1YR |
*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.
**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.
***The spare parts must also have been fitted by an Authorised Service Agent.
Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:
- The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;
- The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and
- The repairs are not required as a result of normal wear and tear.
Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia "Makita" means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.
IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Makita (Australia) Pty Ltd ACN 001 117 335
